Product ID:E-241, ELMER'S WATERPROOF GLUE-RESIN PART 2
MSDS Date:12/11/1986
FSC:8040
NIIN:00N030127
Kit Part:Y
MSDS Number: BPDRC

BORDEN INC

180 EAST BROAD ST
COLUMBUS, OH 43215
US

Emergency Phone: 614-431-6600

Info Phone: 614-431-6680

Cage: 07982

BORDEN INC

208 COLUMBUS, OH 43215-3705 US

Telephone: 614-225-6124

Cage: 07982

FORMALDEHYDE (SARA III)

CAS: 50-00-0

RTECS: LP8925000

Fraction By Weight: <1%

OSHA PEL SEE 1910.1048

ACGIH TLV: C 0.3 PPM; A2; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

PARAFORMALDEHYDE (SARA III)

CAS: 30525-89-4

RTECS: RV0540000

Fraction By Weight: >50%

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

USE OF PERSONAL PROT EQUIP & PRUDENT WORK PRACTICES.

RTECS: 9999999ZZ

PERTAINING TO YOUR OPERATIONS. WE, THEREFORE, RECOM

RTECS: 9999999ZZ

WHETHER OR NOT YOUR PROGRAMS ARE ADEQUATE.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:ACUTE:INGEST:TOXIC. INHAL:HARMFUL IF
INHALED. DUST CAN CAUSE BURNS TO NOSE, THROAT & LUNGS. SKIN:PRIMARY
IRRIT. MOD IRRIT. FORMALDEHYDE:RATS CHRONICALLY EXPOSED TO 14 PPM
CONTRACTED NASAL CANCERS. LIS TED BY NTP & IARC AS ANIMAL CARCIN.
CURRENTLY AVAIL STUDIES DO NOT DEMONSTRATE CASUAL RELATIONSHIP
BTWN(EFTS OF OVEREXP)
Explanation of Carcinogenicity:FORMALDEHYDE:GROUP 2A(IARC), GROUP
2(NTP), OSHA REGULATED.
Effects of Overexposure:HLTH HAZ:EXPOS & CANCER IN HUMANS. LAB TESTS ON
BACTERIA, YEAST, FUNGI & SOME CELL CULTURE SYS HAVE SHOWN TO BE
WEAK MUTAGEN. LTD NUMBER OF REPORTS SUGGEST POSS REPRO DISORDERS.
PARAFORMALDEHYDE:MAY C AUSE ALLERGIC SKIN REACTION.
Medical Cond Aggravated by Exposure:PRE-EXISTING REPSIRATORY & SKIN
DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO FORMALDEHYDE. MAY CAUSE
ALLERGIC SKIN REACTION.

First Aid:INGEST:DILUTE BY DRINKING LG QTYS OF H2O. IMMED CONT POIS CTL
CTR/HOSP EMER ROOM FOR ANY OTHER ADDNL TREATMENT DIRECTIONS.
INHAL:REMOVE TO FRESH AIR. IF NOT BRTHG, GIVE ARTF RESP, PREF
MOUTH-TO-MOUTH. IF BRTHG IS DFCLT, GIVE O2. CALL MD. SKIN:FLUSH
W/H2O. IF IRRIT PERSISTS, CALL MD. EYE:IMMED FLUSH W/PLENTY OF H2O
FOR @ LST 15 MINS. EYELIDS SHOULD BE HELD APART DURING IRRIG TO
ENSURE (SUPDAT)

Flash Point:COMBUSTIBLE
Extinguishing Media:USE WATER SPRAY, DRY CHEMICAL, "ALCOHOL" FOAM OR
CO2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . USE WATER TO KEEP FIRE-EXPOSED CONTAINERS
COOL.
Unusual Fire/Explosion Hazard:COMBUSTIBLE. KEEP AWAY FROM HEAT & FLAME.

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. SWEEP (SCOOP)
UP & REMOVE. PREVENT ENTRY INTO NATURAL BODIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP CONTAINER CLOSED. STORE IN A
COOL, DRY PLACE.
Other Precautions:DO NOT BREATHE VAPORS/DUST. USE W/ADEQ VENT. AVOID
CONTACT W/SKIN & EYES. HANDLE I/A/W GOOD INDUS HYGIENE & SAFETY
PRACTICES. THESE PRACTICES INCLUDE AVOIDING UNNEC EXPOS & REMOVAL
OF MATL FROM EYES, SKIN & CLOTHING.

Respiratory Protection:WHERE AIR CONTAM CAN EXCEED ACCEPT CRITERIA, USE
NIOSH/MSHA APPRVD RESP PROT EQUIP. RESPS SHLD BE SELECTED BASED ON
FORM & CONC OF CONTAM IN AIR I/A/W OSHA 29 CFR 1910.134/OTHER
APPLIC STDS/ GUIDELINE S.
Ventilation:IF AIRBORNE CONTAMS ARE GENERATED WHEN MATL IS
HEATED/HNDLD, SUFFICIENT VENT IN VOL & AIR FLOW PATTERNS SHLD BE
(SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
FIRST AID PROC:H2O CONT W/ENTIRE SURF OF EYES & LIDS. CALL MD.
VENT:PROVIDED TO KEEP AIR CONTAM CONC LEVELS BELOW ACCEPT CRITERIA.
ENGINEERING CTLS:FOLLOWING EXPOS CTL TECHNIQUES MAY BE USED TO
EFTIVE LY MIN EMPLOYEE EXPOS. LOC EXHS VENT, ENCLSD SYS DESIGN,
PROCESS ISOLATION & REMOTE CTL IN COMBINATION W/APPROP (ING 3)

HCC:F8
Appearance and Odor:TAN POWDER; FORMALDEHYDE ODOR.
Percent Volatiles by Volume:<5

Stability Indicator/Materials to Avoid:YES
MAY REACT W/WATER.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:DISPOSE OF ACCORDING TO LOCAL, STATE & FEDERAL
REQUIREMENTS. EMTPY CONTAINER MAY CONTAIN EXPLOSIVE VAPORS. DO NOT
CUT, PUNCTURE OR WELD ON OR NEARBY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.